| 型 | LM-75-24-G1T2 | LM-75-12-G1T2 | |
| OUTPUT | Output voltage | 24Vdc | 12Vdc |
| Output voltage range | 24Vdc ± 0.5Vdc | 12Vdc ± 0.5Vdc | |
| Output current | 麥克斯. 3.125一個 | 麥克斯. 6.25一個 | |
| Output power | 麥克斯. 75W | ||
| Output power range | 0~75W | ||
| Strobe level | High frequency exemption level. | ||
| Dimming range | 0~100%, dimming depth: 麥克斯. 0.1% | ||
| Overload power limitation | ≥102% | ||
| Ripple & Noise | ≤150mV | ||
| PWM frequency | 3600赫茲 | ||
| INPUT | Dimming interface | Leading edge (Triac), Trailing edge (ELV) phase-cut and Push DIM. | |
| Input voltage | 220-240Vac | ||
| Frequency | 50/60赫茲 | ||
| Input current | 230Vac≤0.4A | ||
| Power factor | PF>0.98/230Vac , at full load | ||
| THD | 230Vac@THD＜6%, at full load | ||
| 效率 (typ.) | 88% | 87% | |
| Inrush current(typ.) | Cold start 30A at 230Vac | ||
| Control surge capability | L-N: 2kV | ||
| Leakage current | 麥克斯. 0.5mA | ||
| ENVIRONMENT | 工作溫度 | ta: -20 ~ 50°C tc: 90°C | |
| Working humidity | 20 ~ 95%RH, non-condensing | ||
| Storage temp., humidity | -40°C~80°C, 10~95%RH | ||
| Temp. coefficient | ±0.03%/°C(0-50°C) | ||
| Vibration | 10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes. | ||
| PROTECTION | Over-heat protection | Intelligently adjusting or turning off the output current if the PCB temperature ≥110°C, auto recovers. | |
| Over load protection | Shut down the output when current load≥102%, auto recovers. | ||
| Short circuit protection | Shut down automatically if short circuit occurs, auto recovers. | ||
| Over voltage protection | Shut down the output when non-load voltage≥26V, re-power on to recover after fault condition is removed. | Shut down the output when non-load voltage ≥13V, re-power on to recover after fault condition is removed. | |
| SAFETY & EMC | Withstand voltage | I/P-O/P: 3750Vac | |
| Isolation resistance | I/P-O/P: 100MΩ/500VDC/25°C/70%RH | ||
| Safety standards | IEC/EN61347-1, IEC/EN61347-2-13 | ||
| EMC emission | EN55015, EN61000-3-2 Class C, IEC61000-3-3 | ||
| EMC immunity | EN61000-4-2,3,4,5,6,8,11, EN61547 | ||
| EMC immunity | IEEE 1789 | ||
| OTHERS | 尺寸 | 293×43×30mm(L×W×H) | |
| Packing | 296×44×33mm(L×W×H) | ||
| Weight(G.W.) | 350g±10g | ||
| ∗The driver is suitable for connecting resistor current-limiting LED fixture (e.g. LED strip). The inrush current will be dozens of times increased if connecting built-in constant current IC current-limiting LED fixtures, the driver will activate the overloaded protection (hiccups flickering). When you order, please remark controlling the constant current LED fixture (e.g. MR16 lamp, underground light, LED wall washer, constant current LED strip, etc.), then we can prepare the special programs. |
| Q1.ls OEM同ODM可以 ?
護甲照明係OEM同ODM訂單嘅專業。. 我哋擁有豐富嘅經驗嚟進行生產並確保良好嘅質素.
問題2。 最小起訂量係幾多? 我可以有啲樣品啊 ? 低MOQ。, 1 提供用于樣品檢查質素嘅PCS樣品訂單係可以接受嘅，歡迎為您的項目定製樣品.
問題3。 提前期嘅長短? 樣品需求。 3-5 日。, 數量訂單需要10 - 15日。
問題4。 您如何運送貨物，需要多長時間才能到達? 我哋通常透過Dhl發貨。, Ups。, 聯邦快遞或Tnt。. 它通常需要 3-5 天后到達。 空運同海運都係可選嘅.
問題5。 如何進行定製燈嘅訂購 ? 第一。, 讓我們知道您的要求或繪圖。 第二。, 我哋根據您的要求報價。 第三, 你確認並安排正式訂單嘅付款。 最後., 我哋將開始生產並安排發貨.
問題6。 保修期? 所有護甲照明產品質量。 3 年。, LF定製項目產品，提供5年保脩.
Q7.ls 可以喺產品上打印我嘅LoGo ? 係., 請在生產前正式通知我哋，並首先根據我哋嘅樣品確認設計.
問題8。 如何處理Fault? 我哋提供。 2, 3 和。 5 針對不同種類產品或不同要求嘅照明工程提供一年有限保修. 在此期間。, 如果客戶有證明質量問題，並且該證明得到咗Armor照明工程師嘅批准, 我哋希望用新嘅合格物品替換有缺陷嘅. 請注意，保修不等於使用壽命。 我哋嘅產品使用壽命超過50000鐘頭.
問題9。 我可以參觀您的工廠啊? 確定.,歡迎參觀我哋嘅工廠。. 可以在兩天前讓我們知道您的參觀時間表和您感興趣的產品.
問題10。 你係工廠還是貿易公司。? 我哋係工廠直接出口到海上市場。.
問題11。 你哋為任何著名品牌商店照明提供引導照明呀?? 係.,我哋領導嘅舖頭照明有供應兰科姆。 , 樂。,下一個。,教練。, 伯特嘅蜜蜂,孩之寶。, 靴子。，布勞恩。,M。&S等。. |
