×
Controller Supply-HM-V1-K
Controller Supply-HM-V1-K
Controller Supply-HM-V1-K
Controller Supply-HM-V1-K
  • Rotary dimmer with digital numeric display, visible dimming level.
  • Match with RF 2.4G single zone
  • or multiple zone dimming remote control optional.
  • 0-100% dimming smoothly without any >ash.
  • High load current up to 20A.
  • Logarithmic or linear dimming curve selectable.
  • PWM frequency 500Hz, 2kHz, 8kHz or 16kHz selectable.
  • Over-heat / Over-load / Short circuit protection, recover automatically.
  • Light on/off fade time 3s selectable.
產品詳情 而家反饋

 

 

 

Inpuf and Oufput
Input voliage 12-24VDC
Input current 20一個
Output voliage 12-24VDC
Ouput current ICH,20A Max.
Output power 240W/480W Max.

@(12v/24v)500Hz PWM

Ouput ype Constant volage

 

Dimming data
Input signal Patary Knob + RF 2.4GHz
Control distance 15m(Barrier-free space)
Dimming gray scale 100levels
Dimming range 0 -100%
Dimming curve Logarithmic or linear
PWM frequency 500赫茲 ,2kHz,8kHz,16kHz

 

Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD EN 62368-1:2020+A11:2020
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
認證 斷續器,EMC,LVD,RED

 

Environment
工作溫度 塔: -30°C ~ +55°C
Case temperature (Max.) T c:+85°C
IP評級 IP20

 

Warranty and Protection
保證 5 年。
Protection Reverse polarity
Over-heat
Over-load
Short circuit

 

 

 

Light on/off fade time
Long press match key 5s, then short press match key 3 次,

the light on/off time will be set to 3s, the indicator light blink 3 次.

Light on/off fade time

Long press match key 10s, restore factory default parameter,

the light on/off time also restore to 0.5s.

 

 

 

Malfunctions Analysis & Troubleshooting

Malfunctions Causes Causes
No light 1.No power.

2.Wrong connection or insecure.

1.Check the power.

2.Check the connection.

1.Check the power.

2.Check the connection.

1.Output cable is too long.

2.Wire diameter is too small.

3.Overload beyond power supply capability.

4.Overload beyond controller capability

1.Reduce cable or loop supply.

2.Change wider wire.

3.Replace higher power supply.

4.Add power repeater.

Controller Supply-HM-V1-K-

Controller Supply-HM-V1-K-

 

Controller Supply-HM-V1-K-

 

Controller Supply-HM-V1-K-

 

Controller Supply-HM-V1-K-

Q1.ls OEM同ODM可以 ?

護甲照明係OEM同ODM訂單嘅專業。. 我哋擁有豐富嘅經驗嚟進行生產並確保良好嘅質素.

 

問題2。 最小起訂量係幾多? 我可以有啲樣品啊 ?

低MOQ。, 1 提供用于樣品檢查質素嘅PCS樣品訂單係可以接受嘅,歡迎為您的項目定製樣品.

 

問題3。 提前期嘅長短?

樣品需求。 3-5 日。, 數量訂單需要10 - 15日。

 

問題4。 您如何運送貨物,需要多長時間才能到達?

我哋通常透過Dhl發貨。, Ups。, 聯邦快遞或Tnt。. 它通常需要 3-5 天后到達。 空運同海運都係可選嘅.

 

問題5。 如何進行定製燈嘅訂購 ?

第一。, 讓我們知道您的要求或繪圖。 第二。, 我哋根據您的要求報價。 第三, 你確認並安排正式訂單嘅付款。 最後., 我哋將開始生產並安排發貨.

 

問題6。 保修期?

所有護甲照明產品質量。 3 年。, LF定製項目產品,提供5年保脩.

 

Q7.ls 可以喺產品上打印我嘅LoGo ?

係., 請在生產前正式通知我哋,並首先根據我哋嘅樣品確認設計.

 

問題8。 如何處理Fault?

我哋提供。 2, 3 和。 5 針對不同種類產品或不同要求嘅照明工程提供一年有限保修. 在此期間。, 如果客戶有證明質量問題,並且該證明得到咗Armor照明工程師嘅批准, 我哋希望用新嘅合格物品替換有缺陷嘅.

請注意,保修不等於使用壽命。 我哋嘅產品使用壽命超過50000鐘頭.

 

問題9。 我可以參觀您的工廠啊?

確定.,歡迎參觀我哋嘅工廠。. 可以在兩天前讓我們知道您的參觀時間表和您感興趣的產品.

 

問題10。 你係工廠還是貿易公司。?

我哋係工廠直接出口到海上市場。.

 

問題11。 你哋為任何著名品牌商店照明提供引導照明呀??

係.,我哋領導嘅舖頭照明有供應兰科姆。 , 樂。,下一個。,教練。, 伯特嘅蜜蜂,孩之寶。, 靴子。,布勞恩。,M。&S等。.

 

 

 

将您的消息發送畀我哋。:
而家查詢。
而家查詢。