×
Controller Supply-HM-C1
Controller Supply-HM-C1
Controller Supply-HM-C1
  • 4096 levels 0-100% dimming smoothly without any flflash.
  • Match with Skydance’s 2.4G single zone or multiple zone dimming remote control.
  • One RF controller accept up to 10 remote control.
  • Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
  • Synchronize on multiple number of controllers.
  • Connect with external push switch to achieve on/off and 0-100% dimming function.
Detil Produk Eupan balik ayeuna

 

 

 

Inpuf and Oufput
Input voliage 12-48VDC
Output voliage 3-46VDC
Ouput current 1CH,350mA/700mA
Output power 1.05W-16.1W(350mA)

2.1W-32.2W(700mA)

Ouput ype Constant volage

 

Dimming data
Input signal RF 2.4GHz + Push Dim
Control distance 30m(Barrier-free space)
Dimming gray scale 4096(2^12)levels
Dimming range 0 -100%
Dimming curve Logarithmic

 

 

Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Safety standard(LVD En60950
Radio Equipment(RED) EN 300 328
Sertifikasi Ku,EMC,LVD,RED
Dimming curve Logarithmic

 

 

Environment
Operation temperature Ta: -30°C ~ +55°C
Case temperature (Max.) T c:+85°C
Peunteun IP IP20

 

 

Warranty and Protection
Garansi 5 taun
Protection Reverse polarity
Short circuit

 

 

Weight
Net weight 0.042kg
Gross weight 0.058kg

 

 

 

 

 

Mechanical Structures and Installations

 

 

1.The controller could auto check and output a proper voltage according to its LED quantities.

2.The controller works on buck mode, the voltage of power supply should be greater than the total voltage of the seried LEDs.

 

 

Match Remote Control (two match ways)

 

End user can choose the suitable match/delete ways. Two options are offered for selection:

 

Use the controller’s Match key

Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote.The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote)or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

 

 

Application notes

1.All the receivers in the same zone.

 

 

 

Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,

as long as there is a receiver within 30m, the remote control distance can be limitless.

Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled

by the same remote.

Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.

Strong signal sources such as WiFi routers and microwave ovens will affect the range.

We recommend for indoor applications that receiver placements should be no further apart than15m.

 

2.Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.

 

Push Dim Function

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.

 

  • Short press:

Turn on or off light.

  • Long press (1-6s):

Press and hold to step-less dimming,

With every other long press, the light level goes to the opposite direction.

  • Dimming memory:

Light returns to the previous dimming level when switched off and on again, even at power failure.

  • Synchronization:

If more than one controller are connected to the same push switch, do a long press for more than 10s,

then the system is synchronized and all lights in the group dim up to 100%.

This means there is no need for any additional synchrony wire in larger installations.

We recommend the number of controllers connected to a push switch does not exceed 25 pieces,

The maximum length of the wires from push to controller should be no more than 20 méter.

 

 

Dimming Curve

 

 

 

Malfunctions Analysis & Troubleshooting

 

Malfunctions Causes Troubleshooting
No light 1. No power.

2.Wrong connection or insecure.

1.Check the power.

2.Check the connection.

No response

from the remote

1.The battery has no power.

2.Beyond controllable distance.

3.The controller did not match the remote.

1.Replace battery.

2.Reduce remote distance.

3.Re-match the remote.

 

 

Controller Supply-HM-C1-

Controller Supply-HM-C1-

 

Controller Supply-HM-C1-

 

Controller Supply-HM-C1-

 

Controller Supply-HM-C1-

Q1.ls henteu kunanaon pikeun OEM sareng Odm ?

Para baju Armor mangrupikeun profesional OEM sareng ODM. Kami ngagaduhan pangalaman beunghar ngarawat produksi sareng mastikeun kualitas anu saé.

 

Q2. Naon moq? Tiasa l gaduh sababaraha conto ?

Hq, 1 PCS pikeun Kualitas Pariksa Compét mangrupikeun pesenan conto anu henteu katampa Sampel anu dikonfirmasi pikeun proyék anjeun.

 

Q3.??

Sampel kabutuhan 3-5 poé, mesen kuantitas peryogi 10-15ddays

 

Q4.How anjeun ngintunkeun barang sareng sabaraha lami éta kedah sumping?

Urang biasana dikirim ku DHL, UPS, FedEx atanapi Tnt. lt biasana nyandak 3-5 dinten ka pengiriman laut.airlinean.

 

Q5.how pikeun neruskeun pesenan pikeun lampu ngaropéa ?

Mimitina, hayu urang terang syarat anjeun atanapi gambar.Second, Haripang numutkeun ka anjeun, Anjeun mastikeun sareng ngatur pembayaran kanggo urutan formal.finally, Urang bakal ngahasilkeun produksi sareng ngatur kiriman.

 

Q6.hus panjang pikeun garansi?

Sakabéh produk baju baju 3 taun, Produk proyék LF ngaropéa sareng Jaminan 5years.

 

Q7.ls henteu kunanaon pikeun nyitak logo kuring dina produk ?

Nuhun, Punten ngawartosan kami sacara resmi sateuacan produksi sareng mastikeun desain anu mimiti dumasar kana sampel kami.

 

Q8.How pikeun nganyahokeun salah?

Kami nawiskeun 2, 3 jeung 5 Jaminan terbatas taun pikeun jinis produk atanapi anu béda-béda proyek. Salami periode ieu, Upami konsumén ngagaduhan masalah kualitas buktina sareng buktina disatujuan ku insinyur cahaya senjata, Kami hoyong ngagentos anu cacad kalayan barang anu mumpuni anyar.

Punten dicatet yén garansi henteu sami sareng produk umur umur ngagaduhan langkung ti 50000-jam umur.

 

Q9.can l nganjang pabrik anjeun?

Yakin,Wilujeng sumping di pabrik urang. Tiasa ngantep urang terang jadwal kunjungan anjeun sateuacan dua dinten anu dipikaresep.

 

Q10.are anjeun pabrik atanapi perusahaan dagang?

Kami pabrik langsung ékspor ka pasar laut.

 

Q11.do anjeun nyayogikeun lampu ledah kana lampu toko anu kasohor?

Nuhun,Lampu toko kami LED kedah suplai , Lego,TERAS,Palatih, Lebah bisi,Libro, Sapatu bot,Braun,M&S entc.

 

 

 

Kirim pesen ka kami:
DUKSARI AYEUNA
DUKSARI AYEUNA