Controller Supply-HM-V1-T

Controller Supply-HM-V1-T

RF remote, 0/1-10V, Push Dim (3-in-1) dimming.
4096 livelli 0-100% dimming smoothly without any flflash.
Match with RF 2.4G single zone or multiple zone dimming remote control.

Kontrollur RF wieħed jaċċetta sa 10 Kontroll mill-bogħod.
Funzjoni tat-Trasmjata awtomatika: Controller automatically transmit signal to another controller with 15m control distance.

Sinkronizza fuq numru multiplu ta 'kontrolluri.
Connect with external push switch to achieve on/off and 0-100% funzjoni li tbatti.

Dawl mixgħul / mitfi fade time 3s magħżula.
Sħana żejda / Tagħbija żejda / Protezzjoni ta 'ċirkwit qasir, tirkupra awtomatikament

Ibgħat Email Lilna Ikkuntattja Issa Niżżel bħala PDF

Dettall tal-Prodott Feedback issa

Inpuf and Oufput
Input voliage	12-24VDC
Input current	20.5A
Output voltage	12-24VDC
Output current	1CH,20A
Output power	240W/480W (12V/24V)
Ouput ype	Constant volage

Dimming data
Input signal	RF 2.4GHz 0/1-10V Push Dim
Control distance	15m(Barrier-free space)
Dimming gray scale	4096(2^12)livelli
Dimming range	0 -100%
Dimming curve	Logarithmic
PWM Frequency	500Hz(default)

Safety and EMC
EMC standard (EMC)	ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4
Safety standard(LVD	EN 62368-1:2020+A11:2020
Radio Equipment(RED)	ETSI EN 300 328 V2.2.2
Ċertifikazzjoni	CE,EMC,LVD,RED

Ambjent
Operation temperature	Ta: -30°C ~ +55°C
Case temperature (Max.)	T c:+85°C
Klassifikazzjoni tal-IP	IP20

Warranty and Protection

Garanzija

5 snin

Protection

Reverse polarity

Sħana żejda

Tagħbija żejda

Short circuit

Weight
Net weight	0.234kg
Gross weight	0.054kg

Mechanical Structures and Installations

Wiring Diagram

Note: The RF remote, 0/1-10V dimmer or Push switch can be connected at the same time,

which makes the product more user-friendly and more options to fit for some extra-ordinary demands.

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:

Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote. The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times quickly. The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times quickly. The light blinks 5 times means all matched remotes were deleted.

0/1-10V Dimming

The 0/1-10V input is operable via commercially available simple rotary wall switchs designed for 0/1-10V dimming equipment or from decicated system central dimming controllers.

Compliant with 0-10V, 1-10V, 10V PWM, RX(4 in 1).
We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 5 pieces,The maximum length of the wires from dimmer to LED driver should be no more than 15 metri.

If the controller be used with the RF remote or Push-Dim interface prior to using the 0/1-10V interface,il 0/1-10 V signal should change over 10% to return 0/1-10 V control.

Push Dim Function

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.

Short press:

Turn on or off light.

Long press (1-6s):

Press and hold to step-less dimming,

With every other long press, the light level goes to the opposite direction.

Dimming memory:

Light returns to the previous dimming level when switched off and on again, even at power failure.

Synchronization:

If more than one controller are connected to the same push switch, do a long press for more than 10s,

then the system is synchronized and all lights in the group dim up to 100%.

This means there is no need for any additional synchrony wire in larger installations.

We recommend the number of controllers connected to a push switch does not exceed 25 pieces,

The maximum length of the wires from push to controller should be no more than 20 metri.

Dimming Curve

Light on/off fade time

Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times. Light on/off fade time Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s.

Malfunctions Analysis & Troubleshooting

Malfunctions	Causes	Troubleshooting
No light	1. No power. 2.Wrong connection or insecure.	1.Check the power. 2.Check the connection.
Uneven intensity between front and rear,with voltage drop	1. Output cable is too long. 2. Wire diameter is too small. 3.Overload beyond power supply capability. 4.Overload beyond controller capability.	1.Reduce cable or loop supply. 2.Change wider wire. 3.Replace higher power supply. 4.Add power repeater.
No response from the remote	1.The battery has no power. 2. Beyond controllable distance. 3.The controller did not match the remote.	1. Replace battery. 2.Reduce remote distance. 3. Re-match the remote.

Controller Supply-HM-V1-T-

Q1.ls huwa okay għall-OEM u ODM ?

Dawl Armor huwa professjonali għall-ordni OEM u ODM. Għandna esperjenza rikka biex nipproċedu l-produzzjoni u niżguraw il-kwalità tajba.

Q2.X'inhu l-MOQ? Nista 'jkolli xi kampjuni ?

MOQ baxx, 1 pcs għall-kwalità tal-iċċekkjar tal-kampjuni hija disponibbli Ordni tal-kampjuni huma acceptableand jilqgħu l-kampjuni personalizzati għall-proġett tiegħek.

Q3.How twil tal-Lead time?

Ħtiġijiet tal-kampjun 3-5 jiem, ordni ta 'kwantità teħtieġ 10-15-il jum

Q4.Kif tibgħat il-merkanzija u kemm tieħu biex tasal?

Normalment nibgħatu mid-DHL, UPS, FedEx jew TNT. Normalment jieħu 3-5 jiem biex jaslu. Airlineand tbaħħir bil-baħar wkoll mhux obbligatorju.

Q5.Kif tipproċedi ordni għal dawl personalizzat ?

L-ewwel, għarrafna r-rekwiżiti jew it-tpinġija tiegħek. It-tieni, nikkwotaw skond yourrequirements.Third, inti tikkonferma u tirranġa ħlas għal ordni formali.Finally, aħna se nibdew il-produzzjoni u nirranġaw il-ġarr.

Q6.How twil għall-garanzija?

Il-kwalità kollha tal-prodotti tad-dawl Armor hija 3 snin, Lf prodotti ta 'proġett personalizzati b'garanzija ta' 5 snin.

Q7.ls huwa tajjeb li jistampaw il-LoGo tiegħi fuq il-prodott ?

Iva, jekk jogħġbok għarrafna formalment qabel il-produzzjoni u kkonferma d-disinn l-ewwel ibbażat fuq il-kampjun tagħna.

Q8.How biex tittratta l-Difettuża?

Noffru 2, 3 u 5 garanzija limitata tas-sena għal tipi differenti ta 'prodotti jew rekwiżiti differenti ta' proġetti tad-dawl. Matul dan il-perjodu, jekk il-klijenti għandhom il-kwistjonijiet ta 'kwalità li juru provi u dik il-prova hija approvata minn inġiniera tad-dawl tal-armatura, nixtiequ nissostitwixxu dawk difettużi b'oġġetti kwalifikati ġodda.

Jekk jogħġbok innota li l-garanzija mhix ugwali għal ħajja. Il-prodotti tagħna għandhom ħajja ta 'aktar minn 50000 siegħa..

Q9.Can nżur il-fabbrika tiegħek?

Żgur,merħba li żżur il-fabbrika tagħna. Tista 'tgħarrafna l-iskeda taż-żjara tiegħek qabel jumejn u l-prodotti interessati tiegħek.

Q10.Int fabbrika jew kumpanija kummerċjali?

Aħna fabbrika direttament jesportaw lejn is-suq fuq il-baħar.

Q11.Do inti tforni dawl mmexxija lil kwalunkwe maħżen tad-ditta famuża Dawl?

Iva,maħżen mmexxi tagħna Dawl kellu provvista lil LANCOME , LEGO,LI JMISS,COACH, Burt's Bee,Hasbro, Stivali，BRAUN,M&S eċċ.