×
Controller Supply-HM-C1
Controller Supply-HM-C1
Controller Supply-HM-C1
  • 4096 levels 0-100% dimming smoothly without any flflash.
  • Match with Skydance’s 2.4G single zone or multiple zone dimming remote control.
  • One RF controller accept up to 10 remote control.
  • Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
  • Synchronize on multiple number of controllers.
  • Connect with external push switch to achieve on/off and 0-100% dimming function.
Бүтээгдэхүүний дэлгэрэнгүй Харьд санал хүсэлт

 

 

 

Inpuf and Oufput
Input voliage 12-48VDC
Output voliage 3-46VDC
Ouput current 1CH,350mA/700mA
Output power 1.05W-16.1W(350mA)

2.1W-32.2W(700mA)

Ouput ype Constant volage

 

Dimming data
Input signal RF 2.4GHz + Push Dim
Control distance 30м(Barrier-free space)
Dimming gray scale 4096(2^12)levels
Dimming range 0 -100%
Dimming curve Logarithmic

 

 

Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Safety standard(LVD EN60950
Radio Equipment(RED) EN 300 328
Certification CE,EMC,LVD,RED
Dimming curve Logarithmic

 

 

Environment
Operation temperature Ta: -30°C ~ +55°C
Case temperature (Max.) T c:+85°C
IP үнэлгээ IP20

 

 

Warranty and Protection
Тушаал 5 жил
Protection Reverse polarity
Short circuit

 

 

Weight
Net weight 0.042кг
Gross weight 0.058кг

 

 

 

 

 

Mechanical Structures and Installations

 

 

1.The controller could auto check and output a proper voltage according to its LED quantities.

2.The controller works on buck mode, the voltage of power supply should be greater than the total voltage of the seried LEDs.

 

 

Match Remote Control (two match ways)

 

End user can choose the suitable match/delete ways. Two options are offered for selection:

 

Use the controller’s Match key

Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote.The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote)or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

 

 

Application notes

1.All the receivers in the same zone.

 

 

 

Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,

as long as there is a receiver within 30m, the remote control distance can be limitless.

Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled

by the same remote.

Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.

Strong signal sources such as WiFi routers and microwave ovens will affect the range.

We recommend for indoor applications that receiver placements should be no further apart than15m.

 

2.Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.

 

Push Dim Function

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.

 

  • Short press:

Turn on or off light.

  • Long press (1-6с):

Press and hold to step-less dimming,

With every other long press, the light level goes to the opposite direction.

  • Dimming memory:

Light returns to the previous dimming level when switched off and on again, even at power failure.

  • Synchronization:

If more than one controller are connected to the same push switch, do a long press for more than 10s,

then the system is synchronized and all lights in the group dim up to 100%.

This means there is no need for any additional synchrony wire in larger installations.

We recommend the number of controllers connected to a push switch does not exceed 25 pieces,

The maximum length of the wires from push to controller should be no more than 20 meters.

 

 

Dimming Curve

 

 

 

Malfunctions Analysis & Troubleshooting

 

Malfunctions Causes Troubleshooting
No light 1. No power.

2.Wrong connection or insecure.

1.Check the power.

2.Check the connection.

No response

from the remote

1.The battery has no power.

2.Beyond controllable distance.

3.The controller did not match the remote.

1.Replace battery.

2.Reduce remote distance.

3.Re-match the remote.

 

 

Controller Supply-HM-C1-

Controller Supply-HM-C1-

 

Controller Supply-HM-C1-

 

Controller Supply-HM-C1-

 

Controller Supply-HM-C1-

Q1.ls oem болон ODM-д зүгээр ?

Хуяг гэрэлтүүлэг нь OEM болон ODM захиалгын хувьд мэргэжлийн мэргэжил юм. Бид үйлдвэрлэлд баялаг туршлагатай бөгөөд энэ нь үйлдвэрлэлийг давж, сайн чанарыг баталгаажуулдаг.

 

Q2.Та юу вэ? Зарим нэг дээж авах боломжтой ?

Бага moq, 1 Түүврийн чанарыг шалгах чанарын хувьд PCS-ийг ашиглах боломжтой дээжийн захиалга нь таны төслийн тохируулсан дээжийг хүлээн авах болно.

 

Q3. Тэргүүлэх цаг хугацааны хэрүүл?

Түүврийн хэрэгцээ 3-5 өдрүүд, Тоо хэмжээ захиалга нь 10-15 хоног шаардлагатай

 

Q4. Та бараагаа хэрхэн яаж тээвэрлэдэг вэ, хэр удаан ирэх вэ??

Бид ихэвчлэн DHL-ээр тээвэрлэдэг, Хуу рос, FedEx эсвэл tnt tnt. lt ихэвчлэн авдаг 3-5 ирэх өдрүүд.ARAIREANDEAND TANE-ийг бас заавал ашиглах боломжтой.

 

Q5. Гэрээтэй гэрлийн захиалгыг хэрхэн үргэлжлүүлэх вэ ?

Хамгийн түрүүнд, Таны шаардлагыг эсвэл зурах маягтыг бидэнд мэдэгдээрэй.Second, Бид таны Phorequirment-ийн дагуу иш татдаг, та албан ёсны захиалгын төлбөрийг баталгаажуулж, зохион байгуулж байна, Бид үйлдвэрлэлийг боловсруулж, ачилтыг зохион байгуулах болно.

 

Q6. Баталгаат хугацаатай хэр удаан үргэлжлэх вэ?

Бүх хуяг гэрэлтүүлэх бүтээгдэхүүний чанарын чанар нь 3 жил, LF Төслийн бүтээгдэхүүнийг 5 жилийн баталгаатай.

 

Q7.ls нь бүтээгдэхүүн дээр логоо хэвлэхэд би зүгээр юм ?

Тиймээ, Биднийг үйлдвэрлэл үйлдвэрлэхээс өмнө албан ёсоор боловсруулж, дизайныг эхлээд дээж дээр суурилуулах.

 

Q8. Алдаатай хэрхэн харьцах вэ?

Бид санал болгож байна 2, 3 ба 5 Жилийн хязгаарлагдмал бүтээгдэхүүн эсвэл гэрэлтүүлгийн төслүүдийн янз бүрийн бүтээгдэхүүн, эсвэл өөр өөр төслүүдийн хувьд. Энэ хугацаанд, Хэрэв үйлчлүүлэгчид нотолгооны чанартай чанарын асуудлууд, нотлох баримтыг хуяглах гэрэлтүүлгийн инженерээр батлав, Бид гажигтай хүмүүсийг шинэ мэргэшсэн зүйлсээр солихыг хүсч байна.

Баталгаат хугацаа нь амьдралын хэв маягтай тэнцэхгүй байгааг анхаарна уу. Бүтээгдэхүүнүүд 50000 гаруй цагийн туршид насан туршдаа байдаг.

 

Q9.CAN L Үйлдвэртээ зочилно уу?

Мэдээж,Манай үйлдвэрт зочлоход тавтай морилно уу. Таны айлчлалын хуваарь нь таны сонирхсон бүтээгдэхүүнүүдээс өмнө таны айлчлалын хуваарийг мэдэх боломжтой.

 

Q10. Та үйлдвэр эсвэл худалдааны компани?

Бид үйлдвэр далайн зах дээр шууд экспортлох.

 

Q11.Та та бүх алдартай брэндийн дэлгүүрийн гэрэлтүүлэгт гэрэлтүүлгийг хангаж өгдөг?

Тиймээ,Манай LED дэлгүүрийн гэрэлтүүлэг нь Ланкомтад нийлүүлсэн , Сэц,Дараачийн,Суудлын вагон, Burt-ийн зөгий,Hasbro, Гутал,Цананы хутга,М&S гэх мэт.

 

 

 

Мессежээ бидэнд илгээнэ үү:
Одоо залгах
Одоо залгах