Controller Supply-HM-C1

Controller Supply-HM-C1

4096 levels 0-100% dimming smoothly without any flflash.
Match with Skydance’s 2.4G single zone or multiple zone dimming remote control.
One RF controller accept up to 10 remote control.
Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
Synchronize on multiple number of controllers.
Connect with external push switch to achieve on/off and 0-100% dimming function.

Nosūtiet mums e-pastu Sazinieties ar tagad Lejupielādēt kā PDF

Informācija par produktu Atsauksmes tagad

Inpuf and Oufput
Input voliage	12-48VDC
Output voliage	3-46VDC
Ouput current	1CH,350mA/700mA
Output power	1.05W-16.1W(350mA) 2.1W-32.2W(700mA)
Ouput ype	Constant volage

Dimming data
Input signal	RF 2.4GHz + Push Dim
Control distance	30m(Barrier-free space)
Dimming gray scale	4096(2^12)levels
Dimming range	0 -100%
Dimming curve	Logarithmic

Safety and EMC
EMC standard (EMC)	EN301 489,EN 62479
Safety standard(LVD	EN60950
Radio Equipment(RED)	EN 300 328
Sertifikācija	ŠO,EMC,LVD,RED
Dimming curve	Logarithmic

Environment
Operation temperature	Sejas: -30°C ~ +55°C
Case temperature (Max.)	T c:+85°C
IP vērtējums	IP20

Warranty and Protection
Garantija	5 gadiem
Protection	Reverse polarity Short circuit

Weight
Net weight	0.042kg
Gross weight	0.058kg

Mechanical Structures and Installations

1.The controller could auto check and output a proper voltage according to its LED quantities.

2.The controller works on buck mode, the voltage of power supply should be greater than the total voltage of the seried LEDs.

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote.The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote)or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

Application notes

1.All the receivers in the same zone.

Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,

as long as there is a receiver within 30m, the remote control distance can be limitless.

Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled

by the same remote.

Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.

Strong signal sources such as WiFi routers and microwave ovens will affect the range.

We recommend for indoor applications that receiver placements should be no further apart than15m.

2.Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.

Push Dim Function

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.

Short press:

Turn on or off light.

Long press (1-6s):

Press and hold to step-less dimming,

With every other long press, the light level goes to the opposite direction.

Dimming memory:

Light returns to the previous dimming level when switched off and on again, even at power failure.

Synchronization:

If more than one controller are connected to the same push switch, do a long press for more than 10s,

then the system is synchronized and all lights in the group dim up to 100%.

This means there is no need for any additional synchrony wire in larger installations.

We recommend the number of controllers connected to a push switch does not exceed 25 pieces,

The maximum length of the wires from push to controller should be no more than 20 meters.

Dimming Curve

Malfunctions Analysis & Troubleshooting

Malfunctions

Causes

Troubleshooting

No light

1. No power.

2.Wrong connection or insecure.

1.Check the power.

2.Check the connection.

No response

from the remote

1.The battery has no power.

2.Beyond controllable distance.

3.The controller did not match the remote.

1.Replace battery.

2.Reduce remote distance.

3.Re-match the remote.

Controller Supply-HM-C1-

Q1.l Tas ir labi OEM un ODM ?

Bruņu apgaismojums ir profesionāls OEM un ODM pasūtījumiem. Mums ir bagāta pieredze, lai turpinātu ražošanu un nodrošinātu labu kvalitāti.

Q2. Kāds ir MOQ? Vai es varu saņemt dažus paraugus ?

Zems MOQ, 1 ir pieejami parauga kvalitātes pārbaudei paredzētie gab. Paraugu pasūtījums ir pieņemams, un laipni lūdzam jūsu projektam pielāgotos paraugus.

Q3. Cik ilgs izpildes laiks?

Parauga vajadzības 3-5 dienas, daudzuma pasūtījumam nepieciešamas 10-15 dienas

Q4. Kā jūs nosūtāt preces un cik ilgs laiks nepieciešams, lai tās saņemtu?

Mēs parasti piegādājam ar DHL, UPS, FedEx vai TNT. Tas parasti prasa 3-5 dienas līdz ierašanās brīdim. Aviopārvadājumi un jūras pārvadājumi arī nav obligāti.

Q5. Kā veikt pielāgotas gaismas pasūtījumu ?

Pirmkārt, paziņojiet mums par savām prasībām vai zīmējumu. Otrkārt, mēs citējam saskaņā ar jūsu prasībām. Treškārt, jūs apstiprināt un organizēt maksājumu par oficiālu pasūtījumu. Beidzot, mēs sāksim ražošanu un organizēsim sūtījumu.

Q6. Cik ilgi ir garantija?

Visu Armor apgaismojuma produktu kvalitāte ir 3 gadiem, lf pielāgotiem projekta produktiem ar 5 gadu garantiju.

7. jautājums ir pareizi uz izstrādājuma uzdrukāt savu logotipu ?

Jā, lūdzu, oficiāli informējiet mūs pirms ražošanas un vispirms apstipriniet dizainu, pamatojoties uz mūsu paraugu.

Q8. Kā rīkoties ar bojāto?

Mēs piedāvājam 2, 3 un 5 gada ierobežotā garantija dažāda veida produktiem vai dažādām apgaismojuma projektu prasībām. Šajā periodā, ja klientiem ir kvalitātes problēmas un šo pierādījumu ir apstiprinājuši bruņu apgaismojuma inženieri, mēs vēlētos nomainīt bojātās preces ar jaunām kvalificētām precēm.

Lūdzu, ņemiet vērā, ka garantija nav vienāda ar kalpošanas laiku. Mūsu produktu kalpošanas laiks pārsniedz 50 000 stundu..

Q9. Vai es varu apmeklēt jūsu rūpnīcu?

Protams,laipni lūdzam apmeklēt mūsu rūpnīcu. Var informēt mūs par jūsu apmeklējumu grafiku pirms divām dienām un jūsu ieinteresētajiem produktiem.

Q10. Vai jūs esat rūpnīca vai tirdzniecības uzņēmums?

Mēs rūpnīcā tieši eksportējam uz jūras tirgu.

Q11. Vai jūs piegādājat LED apgaismojumu kādam slavenu zīmolu veikalam Lighting?

Jā,mūsu vadītajam veikalam Lighting bija piegāde LANCOME , LEGO,TĀLĀK,TRENERIS, Bērta bite,Hasbro, Zābaki，BRAUN,M&S utt.