Controller Supply-HM-C1

Controller Supply-HM-C1

4096 levels 0-100% dimming smoothly without any flflash.
Match with Skydance’s 2.4G single zone or multiple zone dimming remote control.
One RF controller accept up to 10 remote control.
Auto-transmittendi munus: Controller automatically transmit signal to another controller with 30m control distance.
Synchronize in multiple numerum moderatoris.
Connect with external push switch to achieve on/off and 0-100% MINDMMIN Function.

Ad Us electronicam mitte Contact Now Download quod PDF

Product Detail Nunc videre

Inpuf and Oufput
Input voliage	12-48VDC
Output voliage	3-46VDC
Ouput current	1CH,350mA/700mA
Output power	1.05W-16.1W(350mA) 2.1W-32.2W(700mA)
Ouput ype	Constant volage

Dimming data
Input signal	RF 2.4GHz + Push Dim
Control distance	30m(Barrier-free space)
Dimming gray scale	4096(2^12)levels
Dimming range	0 -100%
Dimming curve	Logarithmic

Safety and EMC
EMC standard (EMC)	EN301 489,EN 62479
Safety standard(LVD	En60950
Radio Equipment(RED)	EN 300 328
Certification	Ce,EMC,LVD,RED
Dimming curve	Logarithmic

Environment
Operation temperature	Adversus: -30°C ~ +55°C
Case temperature (Max.)	T c:+85N ° C
IP rating	Ip20

Warranty and Protection
Warranty	5 annos
Protection	Reverse polarity Short circuit

Weight
Net weight	0.042kg
Gross weight	0.058kg

Mechanical Structures and Installations

1.The controller could auto check and output a proper voltage according to its LED quantities.

2.The controller works on buck mode, the voltage of power supply should be greater than the total voltage of the seried LEDs.

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote.The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote)or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

Application notes

1.All the receivers in the same zone.

Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,

as long as there is a receiver within 30m, the remote control distance can be limitless.

Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled

by the same remote.

Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.

Strong signal sources such as WiFi routers and microwave ovens will affect the range.

We recommend for indoor applications that receiver placements should be no further apart than15m.

2.Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.

Push Dim Function

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.

Short press:

Turn on or off light.

Long press (1-6s):

Press and hold to step-less dimming,

With every other long press, the light level goes to the opposite direction.

Dimming memory:

Light returns to the previous dimming level when switched off and on again, even at power failure.

Synchronization:

If more than one controller are connected to the same push switch, do a long press for more than 10s,

then the system is synchronized and all lights in the group dim up to 100%.

This means there is no need for any additional synchrony wire in larger installations.

We recommend the number of controllers connected to a push switch does not exceed 25 pieces,

The maximum length of the wires from push to controller should be no more than 20 metris.

Dimming Curve

Malfunctions Analysis & Troubleshooting

Malfunctions

Causes

Troubleshooting

No light

1. No power.

2.Wrong connection or insecure.

1.Check the power.

2.Check the connection.

No response

from the remote

1.The battery has no power.

2.Beyond controllable distance.

3.The controller did not match the remote.

1.Replace battery.

2.Reduce remote distance.

3.Re-match the remote.

Controller Supply-HM-C1-

Q1.ls est okay ad OEM et ODM ?

Armorum lucendi est professional pro OEM et ODM Ordinis. Habemus dives experientia toproced productio et ensure bonum qualis.

Q2.What est ad MOQ? Can l habere aliqua exempla ?

Humilis MOQ, 1 PCs pro sample reprehendo qualitas is available samples Ordinis sunt acceptability receperint customized samples pro project.

Q3.How diu plumbum tempore?

Sample necessitates 3-5 dies, Quantitas ordo necessitates 10-15days

Q4.How tu navem bona et quamdiu non accipere ut perveniant?

Nos plerumque navem per DHL, Ups, FedEx vel TNT. LT plerumque accipit 3-5 diebus ad perveniet.irlineand mare shipping et libitum.

Q5.How procedere ordinem Lorem lux ?

Prior, Venite scire vestra requisita et drawer.second, Nos Quote Secundum yourRequirements.Third, Constituo et disponere solucionis ad formal order.finally, Nos willstart productio et disponere amet.

Q6.How diu ad warantum?

Omnes armorum lucendi products qualis est 3 annos, LF customized project products cum 5Years warantum.

Q7.ls est okay ad print mea logo in productum ?

Sic, Placere informare formaliter ante productionem et confirmet consilium prius BONDON noster Sample.

Q8.how agere cum vitiosa?

Nos offer 2, 3 et 5 Anno scriptor limitata warantiam pro diversis products vel differimirements de luminatione projects. Per hoc tempus, Si customers habent argumentationem qualitas exitibus et probationem est probatus per armis lucendi fabrum, Nos wouls wouls reponere deficiens cum nova qualified items.

Placere note quod warantum non est aequalis lifespan.our products plus quam (V)-hourlong lifespan.

Q9.Can L Visita Factory?

Certus,Welcome to visit nostri Factory. Can lets nos scitis vestri visit schedule ante duos diesand tuum interested products.

Q10.Are tibi officinas vel negotiatione turba?

Nos sunt officinas directe export in mare foro.

Q11.Do supplere DUXERIT EGENSUS ad aliquem celebre Brand Books?

Sic,DUXERIT Store lucendi copia Lancome , Lego,Next,Raeda, Burt est apis,Hasbro, Tabernus，Braun,M&S etc..