Controller Supply-HM-V1-T

Controller Supply-HM-V1-T

RF remote, 0/1-10V, Push Dim (3-in-1) pag-dimming.
4096 levels 0-100% dimming smoothly without any flflash.
Match with RF 2.4G single zone or multiple zone dimming remote control.

One RF controller accept up to 10 remote control.
Auto-transmitting function: Controller automatically transmit signal to another controller with 15m control distance.

Synchronize on multiple number of controllers.
Connect with external push switch to achieve on/off and 0-100% dimming function.

Light on/off fade time 3s selectable.
Over-heat / Over-load / Short circuit protection, recover automatically

Ipadala ang Email Kanato Makigsulti Karon Pag-download ingon PDF

Detalye sa Produkto Feedback karon

Inpuf and Oufput
Input voliage	12-24VDC
Input current	20.5Arte
Output voltage	12-24VDC
Output current	1CH,20Arte
Output power	240W/480W (12V/24V)
Ouput ype	Constant volage

Dimming data
Input signal	RF 2.4GHz 0/1-10V Push Dim
Control distance	15m(Barrier-free space)
Dimming gray scale	4096(2^12)levels
Dimming range	0 -100%
Dimming curve	Logarithmic
PWM Frequency	500Hz(default)

Safety and EMC
EMC standard (EMC)	ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4
Safety standard(LVD	EN 62368-1:2020+A11:2020
Radio Equipment(RED)	ETSI EN 300 328 V2.2.2
Pagpamatuod	CE,EMC,LVD,RED

Environment
Operation temperature	Ta: -30°C ~ +55°C
Case temperature (Max.)	T c:+85°C
IP rating	IP20

Warranty and Protection

Garantiya

5 tuig

Protection

Reverse polarity

Over-heat

Over-load

Mubo nga circuit

Weight
Net weight	0.234kg
Gross weight	0.054kg

Mechanical Structures and Installations

Wiring Diagram

Note: The RF remote, 0/1-10V dimmer or Push switch can be connected at the same time,

which makes the product more user-friendly and more options to fit for some extra-ordinary demands.

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:

Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote. The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times quickly. The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times quickly. The light blinks 5 times means all matched remotes were deleted.

0/1-10V Dimming

The 0/1-10V input is operable via commercially available simple rotary wall switchs designed for 0/1-10V dimming equipment or from decicated system central dimming controllers.

Compliant with 0-10V, 1-10V, 10V PWM, RX(4 in 1).
We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 5 pieces,The maximum length of the wires from dimmer to LED driver should be no more than 15 metros.

If the controller be used with the RF remote or Push-Dim interface prior to using the 0/1-10V interface,ang 0/1-10 V signal should change over 10% to return 0/1-10 V control.

Push Dim Function

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.

Short press:

Turn on or off light.

Long press (1-6s):

Press and hold to step-less dimming,

With every other long press, the light level goes to the opposite direction.

Dimming memory:

Light returns to the previous dimming level when switched off and on again, even at power failure.

Synchronization:

If more than one controller are connected to the same push switch, do a long press for more than 10s,

then the system is synchronized and all lights in the group dim up to 100%.

This means there is no need for any additional synchrony wire in larger installations.

We recommend the number of controllers connected to a push switch does not exceed 25 pieces,

The maximum length of the wires from push to controller should be no more than 20 metros.

Dimming Curve

Light on/off fade time

Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times. Light on/off fade time Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s.

Malfunctions Analysis & Troubleshooting

Malfunctions	Causes	Troubleshooting
No light	1. No power. 2.Wrong connection or insecure.	1.Check the power. 2.Check the connection.
Uneven intensity between front and rear,with voltage drop	1. Output cable is too long. 2. Wire diameter is too small. 3.Overload beyond power supply capability. 4.Overload beyond controller capability.	1.Reduce cable or loop supply. 2.Change wider wire. 3.Replace higher power supply. 4.Add power repeater.
No response from the remote	1.The battery has no power. 2. Beyond controllable distance. 3.The controller did not match the remote.	1. Replace battery. 2.Reduce remote distance. 3. Re-match the remote.

Controller Supply-HM-V1-T-

Q1.ls kini okay alang sa OEM ug ODM ?

Ang suga sa armor propesyonal alang sa order sa OEM ug ODM. Kami adunay daghang kasinatian sa pagpadayon sa produksiyon ug pagsiguro sa maayong kalidad.

Q2.Unsa ang MOQ? Mahimo ba ako makakuha mga sample ?

Ubos nga MOQ, 1 Ang mga pcs alang sa kalidad sa pagsusi sa sample anaa Ang mga sample order madawat ug abi-abi ang customized nga mga sample alang sa imong proyekto.

Q3.Unsa kadugay sa Lead time?

Sample nga mga kinahanglanon 3-5 mga adlaw, gidaghanon order nagkinahanglan 10-15days

Q4.Giunsa nimo ipadala ang mga butang ug kung unsa ka dugay kini moabut?

Kasagaran kami ipadala pinaagi sa DHL, UPS, FedEx o TNT. Kini kasagaran nagkinahanglan 3-5 mga adlaw sa pag-abot.Airlineug dagat shipping usab opsyonal.

Q5.Unsaon sa pagpadayon sa usa ka order alang sa customized nga kahayag ?

Una, ipahibalo kanamo ang imong mga kinahanglanon o drowing.Ikaduha, kami mokutlo sumala sa imong mga kinahanglanon.Ikatulo, gikumpirma nimo ug gihikay ang pagbayad alang sa pormal nga order.Sa katapusan, magsugod kami sa produksyon ug maghikay sa pagpadala.

Q6.Unsa ka dugay ang warranty?

Ang tanan nga kalidad sa mga produkto sa suga sa Armor 3 tuig, Kung gipahiangay ang mga produkto sa proyekto nga adunay 5 ka tuig nga garantiya.

Q7. Okay ra nga i-print ang akong LoGo sa produkto ?

Oo, palihug ipahibalo kanamo nga pormal sa wala pa ang produksiyon ug kumpirmahi una ang disenyo base sa among sample.

Q8.Unsaon pag-atubang sa Sayop?

Among gitanyag 2, 3 ug 5 limitado nga tuig nga warranty alang sa lain-laing mga matang sa mga produkto o lain-laing mga kinahanglanon sa suga proyekto. Atol niini nga panahon, kung ang mga kustomer adunay mga isyu sa kalidad sa pagpakita ug kana nga pruweba giaprobahan sa mga inhinyero sa suga sa armor, gusto namong ilisan ang mga depekto sa bag-ong mga kuwalipikadong butang.

Palihug timan-i nga ang warranty dili katumbas sa lifespan.Our mga produkto adunay labaw pa kay sa 50000-hour long lifespan.

Q9.Can l mobisita sa imong pabrika?

Sigurado,welcome sa pagbisita sa among pabrika. Mahimo ipahibalo kanamo ang imong iskedyul sa pagbisita sa wala pa ang duha ka adlaw ug ang imong mga interesado nga produkto.

Q10.Ikaw ba ang pabrika o kompanya sa pamatigayon?

Kami ang pabrika nga direkta nga gi-eksport sa merkado sa dagat.

Q11.Gihatagan ba nimo ang nanguna nga suga sa bisan unsang sikat nga tindahan sa brand nga Pag-iilaw?

Oo,ang among gipangulohan nga tindahan nga suga adunay suplay sa LANCOME , LEGO,SUSUNOD,COACH, Burt's Bee,Hasbro, Mga botas，UTOK,M&S ug uban pa.