

| Inpuf and Oufput | |
| Input voliage | 12-48VDC |
| Output voliage | 3-46VDC |
| Ouput current | 1CH,350mA/700mA |
| Output power | 1.05W-16.1W(350mA)
2.1W-32.2W(700mA) |
| Ouput ype | Constant volage |
| Dimming data | |
| Input signal | RF 2.4GHz + Push Dim |
| Control distance | 30م(Barrier-free space) |
| Dimming gray scale | 4096(2^12)levels |
| Dimming range | 0 -100% |
| Dimming curve | Logarithmic |
| Safety and EMC | |
| EMC standard (إي إم سي) | EN301 489,EN 62479 |
| Safety standard(لفد | EN60950 |
| Radio Equipment(RED) | EN 300 328 |
| شهادة | هذه,إي إم سي,لفد,RED |
| Dimming curve | Logarithmic |
| Environment | |
| Operation temperature | نفاذية عالية للضوء: -30°C ~ +55°C |
| Case temperature (الأعلى.) | T c:+85درجة مئوية |
| مستوي رقم التعريف الألكتروني | IP20 |
| Warranty and Protection | |
| ضمان | 5 سنوات |
| حماية | Reverse polarity Short circuit |
| Weight | |
| Net weight | 0.042كجم |
| Gross weight | 0.058كجم |

| Mechanical Structures and Installations |

| 1.The controller could auto check and output a proper voltage according to its LED quantities.
2.The controller works on buck mode, the voltage of power supply should be greater than the total voltage of the seried LEDs. |
| Match Remote Control (two match ways)
|
|
| End user can choose the suitable match/delete ways. Two options are offered for selection:
|
|
| Use the controller’s Match key
Match: Delete: |
Use Power Restart
Match: Delete: |
| Application notes
1.All the receivers in the same zone. |

| Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,
as long as there is a receiver within 30m, the remote control distance can be limitless. Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote. Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that receiver placements should be no further apart than15m.
2.Each receiver(one or more) in a different zone, like zone 1, 2, 3 أو 4. |

| Push Dim Function
The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.
Turn on or off light.
Press and hold to step-less dimming, With every other long press, the light level goes to the opposite direction.
Light returns to the previous dimming level when switched off and on again, even at power failure.
If more than one controller are connected to the same push switch, do a long press for more than 10s, then the system is synchronized and all lights in the group dim up to 100%. This means there is no need for any additional synchrony wire in larger installations. We recommend the number of controllers connected to a push switch does not exceed 25 pieces, The maximum length of the wires from push to controller should be no more than 20 متر.
Dimming Curve
|

|
Malfunctions Analysis & Troubleshooting |
| Malfunctions | Causes | Troubleshooting |
| No light | 1. No power.
2.Wrong connection or insecure. |
1.Check the power.
2.Check the connection. |
| No response
from the remote |
1.The battery has no power.
2.Beyond controllable distance. 3.The controller did not match the remote. |
1.Replace battery.
2.Reduce remote distance. 3.Re-match the remote. |





| Q1.ls بخير لتصنيع المعدات الأصلية وتصنيع التصميم الشخصي ?
إضاءة الدروع مهنية لترتيب OEM و ODM. لدينا تجربة غنية لتجاوز الإنتاج وضمان الجودة الجيدة.
س 2. ما هو موك? هل يمكنني الحصول على بعض العينات ? موك منخفضة, 1 أجهزة الكمبيوتر الخاصة بجودة فحص العينات متاحة. عينات النظام مقبولة ونرحب بالعينات المخصصة لمشروعك.
Q3.How طويلة من المهلة? احتياجات العينة 3-5 أيام, طلب الكمية يحتاج 10-15days
س 4. كيف تقوم بشحن البضائع وكم يستغرق وصولها? نحن عادة نشحن بواسطة DHL, يو بي إس, فيديكس أو تي إن تي. عادة ما يأخذ lt 3-5 أيام للوصول. الشحن الجوي والبحري اختياري أيضا.
س 5. كيفية متابعة طلب الضوء المخصص ? أول, دعنا نعرف متطلباتك أو الرسم, نقتبس حسب متطلباتك ثالثا, أنت تؤكد وترتب الدفع لأمر رسمي, سنبدأ الإنتاج وترتيب الشحن.
Q6.How للضمان? جميع جودة منتجات الإضاءة Armor 3 سنوات, lf منتجات المشروع المخصصة مع ضمان 5 سنوات.
Q7.ls لا بأس بطباعة LoGo على المنتج ? نعم, يرجى إبلاغنا رسميًا قبل الإنتاج وتأكيد التصميم بناءً على نموذجنا أولاً.
س 8: كيف نتعامل مع المعيب? نحن نقدم 2, 3 و 5 ضمان محدود لمدة عام لأنواع مختلفة من المنتجات أو متطلبات مختلفة لمشاريع الإضاءة. خلال هذه الفترة, إذا كان لدى العملاء مشكلات جودة التدقيق وكان هذا الدليل معتمدًا من قبل مهندسي إضاءة الدروع, نود استبدال العناصر المعيبة بعناصر مؤهلة جديدة. يرجى ملاحظة أن الضمان لا يساوي العمر الإفتراضي. تتمتع منتجاتنا بعمر افتراضي يزيد عن 50000 ساعة.
Q9.Lan l زيارة المصنع الخاص بك? بالتأكيد,مرحبا بكم فى زيارة المصنع. يمكن أن تتيح لنا معرفة جدول زيارتك قبل يومين ومنتجاتك المهتمة.
س 10: هل مصنع أو شركة تجارية? نحن مصنع تصدير مباشرة إلى سوق البحر.
Q11. هل تقوم بتزويد إضاءة LED لأي متجر إضاءة ذي علامة تجارية مشهورة? نعم,كان لدينا متجر الإضاءة led إلى LANCOME , العاب تركيب,التالى,مدرب, نحلة بيرت,هاسبرو, أحذية,براون,م&S إلخ. |
توصية المنتج